Civil Quiz 1
Which of the following stone has the highest resistance to fire?
The three major types of ethical issues include except?
Which reservoir is also known as Mitigation reservoir?
As per IS specifications, the maximum final setting time for ordinary Portland cement should be
A point is 15 units away from the vertical plane and 12 units away from profile plane and horizontal plane in 1st quadrant then the projections are drawn on paper the distance between the front view and top view of point is
In order to determine the natural features such as valleys, rivers, lakes etc., the surveying preferred is
Which of the following is not a component of the plumbing drainage system?
The bearing plates are used to fix
When we arrange turbine blades in multiple stages it is called
Military organisation is known as
which of the following is type of stress?
Free surface of a liquid tends to contract to the smallest possible area due to force of
What is the disadvantages of disuniting of structures?
What is proportion mortar for grouting of thin cracks?
Retailing category(ies) based on ownership arrangement would be
The spacing of bars for perforations in coarse screens used for the treatment of sewage, is
The slope of shear force line at any section of the beam is also called
Which type of pump is designed to handle rocks and other solids?
A triangle is placed perpendicular to horizontal plane and inclined to vertical which of the following is true?
Width of ballast section for Broad Gauge is
Hard water for public water supply is discarded because
The distance between e.g. of compression and e.g. of tension flanges of a plate girder, is known as
Air contents should be _________ % by volume.
If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is
When depth of insertion of turbidity rod increases, the reading in the turbidity rod
In pressure supply mains, water hammer pressure is reduced by providing
A regular triangular prism is resting on H.P and section plane is parallel to H.P and cutting the prism the section would be a
The quantity of a liquid flowing per second through a section of a pipe or a channel is called discharge and is measured in cumecs (m3/s).
How does a turbulent boundary layer produce swirls?
The ultimate Settlement of a soil is directly proportional to: