Civil Quiz 4
As per Lacey's theory, the silt factor is
The factor which effect the quality of compaction, is
Shales are
Which system of collection of sewage is a dry system?
Lacey assumed that silt is kept in suspension because of the normal components of eddies generated from the
the term ISWM refers to:
If you can keep things at work in order and have a neat workplace, then you have great ________ _____.
Woodruff key permits ________movement b/w shaft and the hub.
For fourth class building the doors and windows shall be of______________wood or country wood.
The value of Illumination in lux of stairs
#NAME?
The speed ratio in case of Francis turbine varies from
The flow in which each liquid particle has a definite path and their paths do not cross each other is called
The minimum spacing between the bars on fine screen is
In a truss girder of a bridge, a diagonal consists of mild steel flat 4001.S.F. and carries a pull of 80 tonnes. If the gross-diameter of the rivet is 26 mm, the number of rivets required in the splice, is
What is positive suction head?
The coefficient of curvature is defined
Electromagnetic radiation:
The person or organization, who receives the information, is in a position to remedy the problem or alert the affected parties is called as
When the flow in an open channel is gradually varied, the flow is said to be
SI units of shear force is
provides only one sewer to carry both foul sewage and rainwater.
The ratio of power at the shaft of turbine and power delivered by water to runner is known as?
A line of length 30 inches is parallel to profile plane and makes an angle of 60 degrees with vertical plane. The length of line in top view is ________inches.
In Pelton wheel if angle of deflection is not mentioned then we assume it as_
In CBR test, the value of CBR is calculated at
Which of following proportion of different ingredient of concrete mix confirm to the arbitrary mothod of mixing?
For any part of a beam subjected to uniformly distributed load, bending moment diagram is
A pre-stressed concrete member
The temporary adjustments of a prismatic compass are i) Centering ii) Levelling iii) Focusing the prism The correct order is
The flow in a pipe or channel is said to be non-uniform when